Results 1 to 5 of 5

Thread: LED bulbs in stock sockets

  1. #1
    Senior Member midway's Avatar
    Join Date
    Jan 2016
    Posts
    361

    LED bulbs in stock sockets

    Bulbs fit nicely with room to spare. VERY bright! great color and give excellent indication from the side Amazon link below
    EP36 flasher from any auto part store will slow them down.

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    https://www.ebay.com/itm/Novita-Elec...FXGwaS&vxp=mtr

    Please take extreme care when removing the Y0039.K GENUINE BUELL OUTER TURN SIGNAL LENS.
    Best to remove the screw and just loosen the lens enough to slip a tiny flat tip under the base reflector and free that up before taking the lens all the way off at a 45 degree angle.
    Attached Images Attached Images
    Last edited by midway; 10-20-2017 at 05:30 PM.

  2. #2
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,217
    Cool !

  3. #3
    Senior Member
    Join Date
    Nov 2010
    Posts
    5,416
    Looks great. I was going to try to do the same but the dang flexible part of the flasher's shaft cracked on me! So had to go aftermarket.

  4. #4
    Member
    Join Date
    Jan 2017
    Location
    Winchester, VA
    Posts
    35
    Can't decide to save my life on aftermarket turn signals. Might go this route!

  5. #5
    Senior Member midway's Avatar
    Join Date
    Jan 2016
    Posts
    361
    These are still an excellent upgrade for the stock signals IMO. But please beware of the lens cover removal. This should be where your focus is for the mod or you'll need new lenses for sure. Irritating if broken but replacements are available if needed. Has anyone found a way to salvage a broken lense? Hate to toss them out.

    part number Y0039.K


    Attached Images Attached Images
    Last edited by midway; 05-12-2018 at 03:10 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •