Results 1 to 5 of 5

Thread: baro sensor enabled eeprom?

  1. #1
    Senior Member
    Join Date
    Jul 2007
    Posts
    126

    Question baro sensor enabled eeprom?

    Anybody have a baro sensor enabled eeprom for the BUEID (2007 XB12S) firmware?

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,048
    Dodge, the Baro sensor activation isn't part of the fueling program or the firmware, it's an ECM Parameter. You are able to toggle it on or off regardless of what firmware or fueling program you have.

    Whatever setting it has will carry over on the eeprom file from wherever you got it. So if it's 'off' from there, it will be 'off' when you load it on your ECM. Just turn it back on.

  3. #3
    Senior Member
    Join Date
    Jul 2007
    Posts
    126
    Yeah, was able to set it up using the latest ver of ESpy on my 08 and verified it is working by applying either pressure or vacuum to the sensor. But, cant seem to get it up and working on the 07. Have enabled it via ECMDroid, but still a no go. Was hoping to source a complete eeprom for the 07 with it confirmed and functioning properly.
    thanks cooter

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,048
    I'm not sure what you're up to dodge. I don't understand what you mean by "Have enabled it via ECMDroid, but still a no go". Does that mean you can't see it on live data? With no info from you, it sounds like a wiring issue in baro circuit in the '07.

  5. #5
    Senior Member
    Join Date
    Jul 2007
    Posts
    126
    Trying to tackle this once again.. Got the 08 working fine with the baro sensor using ecmspy mono. Trying to do same with the 07, but there are greyed out areas in the 07 settings via mono. The settings options that I can not enable are: "Read sensors continuously" and "Use baro pressure (not MAP) sensor" Can't enter anything into the "Static air pressure stored value" window as well.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •