Those stand attachments are for the front wheel buddy. The rear uses paddles or spool attachments.20170402_114219.jpg
Hello All,
Just picked up a T-Rex rear stand for an '07 12scg. The stand clears the tires and that's about it; it's pretty "tight". Am I supposed to "thread" the stand into position some way that I just may be missing or don't understand?
Thanks in advance.
49c4fda1744f92604d207b094da39bece2fd9ef3-5.jpg
49c4fda1744f92604d207b094da39bece2fd9ef3-4.jpg
49c4fda1744f92604d207b094da39bece2fd9ef3-1.jpg
49c4fda1744f92604d207b094da39bece2fd9ef3-2.jpg
~Darren
Those stand attachments are for the front wheel buddy. The rear uses paddles or spool attachments.20170402_114219.jpg
Last edited by wickedchop; 01-28-2018 at 09:38 PM.
Thanks wickedchop. Looks like the kit (triple tree & rear stand) i received from T-Rex is incomplete or incorrect parts were sent. The only other part I have is the attachment for the triple-tree. I'm working with T-Rex support about this. Thanks for your input; much appreciated.
unwrapped triple tree attachment:
baf92cb276788c6d0bd4195d0b7a429cf5ed23b8-1.jpg
When you finally get a rear stand for it, you may have to open it up with a portable power to fit the swingarm.
Buells make the world go around because they have very wide rear ends
I've seen that white bike around, someplace ?????
The Buell is pretty wide at the Swing arm. My Pitbull rear stand is adjusted all the way out to fit my buell. It won't fit any of my other bikes (Suzuki DR650 & 1200S Bandit) when adjusted to the Buell. I suspect the T-Rex is just a tad narrow.
That is a front stand and triple tree lift attachment, I use Trex stands and the rear fits with room to spare
Last edited by oh9bolt; 01-31-2018 at 08:14 PM.
Well after working with T-Rex support to track down the shipment, they realized they missed packing up a rear stand when they originally sent out my set. They were able to send out the rear to me in a couple of days. All good now. Thanks to everyone for schooling me on these stands