Does the stock right air scoop fit?
Hi Buellers i know i am bombing this forum at the moment but there is just so much knowledge on here that i don't have so thanks again.
Question, any ideas where i could get a right side air scoop to fit with my micron headers on a 06 XB12SS. Don't really care if it isn't the same as the left side as long as it fits & is black. Gets pretty hot in Aussie for these girls so really could do with a extra bit of air. Thanks again guys.
Does the stock right air scoop fit?
Thats a good question mate, I just assumed it wouldn't because of the shape of the Micron headers? Love uf someone could tell me other wise. I would just buy original.
mick: the inner piece bolts on with no problem. the outer needs to be trimmed for header clearance as in cody's link. do you need the part numbers for the entire RSS setup? still alot of them in the system.
Last edited by user_deleted; 02-04-2018 at 11:30 AM.
Yes thanks i would like the part number. Suppose getting it here in Aussie would be impossible?
not sure mick but any H-D dealer can run the part #'s for you and order in. if they say they can't let me know and i'll order up for you and ship it over. shipping weight a bit less than 3 US pounds. here's your numbers:
inner scoop----# M0852.7AA quantity 1 required
outer scoop-----# M0851.7AA quantity 1 required
attachment screws---# AN1005.3FSS quantity 3 required
last time i ordered all of the above retail total was close to $70 US as memory serves me.
Last edited by user_deleted; 02-03-2018 at 02:48 PM.
Thanks so much for the part numbers. Unfortunately our HD dealer here looks at you like you have two heads when you mention Buell but i will give them a go.
I really am blown away by the help all you guys are willing to give on this site. It really feels like one big Buell family! Thanks everyone.
Will do Mr Fringe