Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Considering a Few Mods/Upgrades - Any Advice?

  1. #11
    Senior Member Mesozoic's Avatar
    Join Date
    Jul 2008
    Location
    Tucson, AZ
    Posts
    192
    I installed some carbon frame covers on my XB to cover up some frame damage and one of the nice things about that is that it's definitely reduced the heat I feel on my leg.

    I was looking up carbon frame covers for the 1125, but they are ridiculously expensive.

  2. #12
    Junior Member
    Join Date
    Feb 2018
    Posts
    15
    I put the United Pacific strobe module on my Triumph and it didn't work there either so returned it. Bought two different ones from superbrightleds.com and worked with no problems.

    The cheaper one is $5 and install is just cutting your brake light wire and spicing the box into the circuit while also splicing the box into your ground. Works great. Flash fast, then slow, then solid on.

    The other one is $6 on clearance. It is internally grounded so only two splices, no ground necessary. It's fairly heavy duty but I like the cheaper one better as this one just sort of flutters the brake light.

    It's a bit of a pain to get at the brake light wiring. Unplug it from the lamp and there's ample room to work the first time you do it. Since I ended up doing it three times the wiring was getting a little tight.

    Used one on the 1125 and the other on the Trumpet. Cheap safety for around $15 with postage and 10 minutes work.

  3. #13
    How difficult to wire up the 2010 led tail on an 08?

  4. #14
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    1,960
    on a scale from 1 to 10 , a 1.5 very easy.

    https://www.ebay.com/itm/Erik-Buell-...cAAOSw37BaT4I6

  5. #15
    Senior Member midway's Avatar
    Join Date
    Jan 2016
    Posts
    345
    I installed that tail light too, excellent! These signal bulbs and LED flasher was HIGH on my list of first mods and very satisfying... ENJOY!
    https://www.buellxb.com/forum/showth...-stock-sockets

  6. #16
    Senior Member
    Join Date
    Mar 2015
    Location
    Phoenix, AZ
    Posts
    731
    I don’t think the R or CR have the white connector that the later XB’s did.

    Regardless, it’s still easy.



Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •