mine is 15 sx @ 4500 , I had my clutch out a few times never checked my hub nut ?? How did you check Torque ? Did you use a crank lock tool ?
That would have been a great time to pop these in .
https://www.ebay.com/itm/Erik-Buell-...sAAOSwqbxaLqCL
973A6820-2DC3-4C33-8E89-69D03B359F81.jpg
70FFBBD7-4189-47C5-9CD2-18306A168D21.jpg
I haven’t road my EBR for a couple days because of my concern of the clutch hub nut backing off and destroying my machine. My SX is a early 2015 with 4800 miles. So I got into it today and everything looks good “sigh of relief” but I think all should check it out. It took probably twenty minutes to get to the nut.. lol that’s what she said...
mine is 15 sx @ 4500 , I had my clutch out a few times never checked my hub nut ?? How did you check Torque ? Did you use a crank lock tool ?
That would have been a great time to pop these in .
https://www.ebay.com/itm/Erik-Buell-...sAAOSwqbxaLqCL
Last edited by Silverrider; 03-31-2018 at 05:44 PM.
After only 4500 miles you had/chose to change the clutch springs ?
I wish , I fried my clutch at 2k , long story EBR put lighter springs in the 2015s for the weak left handed guys and the clutch slips at high revs. And to make things worse I added a pipe and tune which increased 15- 17 HP . Long story why I fried my clutch.
clutch08.jpg
I have a strong left arm. LOL diggity diggity diggity QuagmireIP.jpg
Last edited by Silverrider; 03-31-2018 at 08:19 PM.
No this whole idea was just for a piece of mind. I have seen the stories of them backing off, so I had to check. I just threw it in gear and checked if it was tight.
Where have you "seen those stories of the clutch nut backing off"? I haden't ever heard of that and can't find any threads on here, BadWeb, or EBR? Is it just a guy on facebook posting thing?
Mine does rattle quite a bit at idle clutch out like a dry clutch does, but the noise seems to be from the stator side?
Can’t remember where I seen it. It was in a video and mucho comments about other people getting into their clutches and seeing the same thing.
And a couple people were saying the stator nut would back off on the 1125..? I don’t know I have no experience with those bikes personally. I figured it is little time for a big problem so I was just planting seeds.