Page 2 of 7 FirstFirst 1234 ... LastLast
Results 11 to 20 of 66

Thread: Got another Buell...

  1. #11
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    I was hoping you would chime in and guide me to the most common issues first. Thanks lunatic. I will check all the above and report back with a update.

  2. #12
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by MakingPAIN View Post
    I was hoping you would chime in and guide me to the most common issues first. Thanks lunatic. I will check all the above and report back with a update.
    always my pleasure! key switch relay might have over-heated during its life from either low voltage or dirty contacts where relay plugs into fusebox. i'd try that first. it crosses over to popular ford and chrysler a/c relays available at most auto parts joints. rated @ 20 amps. here's cross reference for more of them.....
    Duralast Part#19389---retails for about 8
    Panasonic CM1-D-12V---""""""""""""""""" 5
    dealer part # is H-D#31522-00
    Last edited by user_deleted; 04-11-2018 at 02:32 PM.

  3. #13
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,897
    Thats perfect Lunatic
    Dead/weak batteries and long cranking times kill those relays

  4. #14
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    Right on fellas. This will be good fun. Sometimes education is expensive I’m glad I have free teachers lol

  5. #15
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,790
    uly2_825.jpg

    When you are all done you will have it looking better than this one!!! Based on the great looks of your other bikes!

  6. #16
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    Thanks silver! Yeah I already cleaned it up from those pics. It looks like someone owns it now, or slightly cares about it.

    I am stoked on diggin into this bike. I really don’t like chasing wires but it is part of the game. I am going to make a mix of atf and oil and pour some in the cylinders to pre lube the rings. This has been sitting for a long time. And just hope oil gets to the bottom end as quick as possible after I prime the filter..

    Wait what the hell am I talking about I haven’t even got power to the dash lol. I put the damn buggy before the horse again.

  7. #17
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    And I hope I can clean it up to look as good as that one silver rider

  8. #18
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,790
    Make sure you take out the fuel pump before you get any power, you dont want it sucking up any bad old junk from the tank jamming it in the injectors,Dont ask how I know. Flush flush and flush first !!!!

    How many miles are on it?

  9. #19
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    No clue on miles the cluster hasn’t powered up yet.


    Yeah and good thinking I will pull the fuel pump before I prime it

  10. #20
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,425
    Quote Originally Posted by MakingPAIN View Post
    No clue on miles the cluster hasn’t powered up yet.


    Yeah and good thinking I will pull the fuel pump before I prime it

    I think the rider of Silver knows the pins to apply power to, to energize the cluster.



Page 2 of 7 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •