Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: New turn signals

  1. #1
    Senior Member
    Join Date
    Feb 2009
    Posts
    276

    New turn signals

    Hey guys and gals, been a really long time since Iíve posted anything here. Iím passing the lightning on to my fiancť, as Iím going to be picking up an EBR 1190RX later next week. I had removed my turn signals on the XB years ago and I wanted to add them back for the fiancť. I purchased some aftermarkets and installed them and they were working fine. I had also modified my headlight to run both beams when switched on high years ago and to be honest, it was done very sloppy. So I decided to fix that as well. Job done, headlights work, but now my turn signals wonít blink and the modulator/electronic flasher just buzzes audibly. Any suggestions??? I greatly appreciate any input.

  2. #2
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,748
    Not sure but if you went with LEDs you will need a different flasher. EP36 flasher from the parts store. Depends on the leds. Mine did the same thing. Buzzing flasher and no blinking. The ep36 flasher will fix it.

    But any way tell us more about the EBR that you are getting !!!!!! pics! miles ? price ?
    Last edited by Silverrider; 04-29-2018 at 01:40 AM.

  3. #3
    Senior Member
    Join Date
    Feb 2009
    Posts
    276
    The turn signals were working and flashing just fine until I reconnected the headlight. Then they stopped flashing, so........Iím not sure itís the flasher/modulator. Iím giving up for tonight and going to start fresh in the morning.

  4. #4
    Senior Member
    Join Date
    Feb 2009
    Posts
    276
    I donít have pics of the EBR yet, itís located in Louisiana and I am in NC. Picked it up for $7,500 with 200 miles on it. Stock, no mods, in yellow. Looking to possibly wrap it, yellow is not my thing, but the price was right for me. So, I will be flying down on Thursday and riding that bad boy all the way back to NC

  5. #5
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,748
    Great deal, year ?

  6. #6
    Senior Member
    Join Date
    Feb 2009
    Posts
    276
    Itís a 2014. Side note, Iím searching for a phone mount for the EBR, anyone use one or have a recommendation.

  7. #7
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,748
    Quote Originally Posted by dustin_usmc1 View Post
    It’s a 2014. Side note, I’m searching for a phone mount for the EBR, anyone use one or have a recommendation.
    You will get your answers on FB as I see you have posted.

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,472
    Probably a bad connection to the turn signals after messing around under the flyscreen. Check your wiring.

    Congrats on the RX! Thats an awesome deal!

  9. #9
    Senior Member
    Join Date
    Feb 2009
    Posts
    276
    Cooter, I will be checking all of yesterdayís work today. Iím pretty sure the turn signals are wired fine, as they were working before I messed with the headlight.

  10. #10
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    8,472
    Oh, I know. Just saying it's all packed under the windscreen there and it's possible a connector got pulled loose.

    When the T/S are activated and the relay is buzzing the light should still be on. Are they?



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •