Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: Cooter puts spools on an XB

  1. #21
    Senior Member
    Join Date
    Jan 2009
    Location
    SF East Bay
    Posts
    1,129
    Quote Originally Posted by Cooter View Post
    Sweet! Please add pics when you do it, we know you'll do it right I'm curious how long a bolt/sleeve you'll need... or even better, a slightly longer shouldered bolt with a nylon crush washer would be slick. Who cares if they spin?
    Probably not gonna do it any different than you did, honestly. lol

  2. #22
    Senior Member
    Join Date
    Mar 2015
    Posts
    1,565
    Quote Originally Posted by jetlee View Post
    Probably not gonna do it any different than you did, honestly. lol
    How did this turn out jetlee? I started doing some preliminary measuring and came up with an approximation of a ~27mm spacer needed to go inside the swingarm. I will probably go down to Ace hardware and look for some sort of spacer that measures out to that and start there. I really dont want to stack a bunch of fender washers together. LOL.
    Last edited by 34nineteen; 03-05-2020 at 12:03 AM.

  3. #23
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,320
    If you can reach in that pocket to tighten the nut, you'll be ok with the spool in single shear (on the outside wall) with a big OD washer.



Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •