-
Cooter puts spools on an XB
STT actually. I don't know if this is exactly the same for the shorter swing arm, but it would be easy enough to find out, and I will when I attack The XB9-SX next!
For $5 you really can't go wrong. I looked for a set that had a flange at the base for stability against a swingarm without a thick tab. And an 8mm bolt. I'm sure 6mm would be fine but bigger is better right? 8mm will also fit a 5/16" bolt perfectly. Murica'
https://www.ebay.com/itm/CNC-Swingar...72.m2749.l2649
Take your wheel off lazy guy. It will make your life so much easier.
Left side inside:
Right side inside:
I wanted to make sure they were equal, and it turns out it was really easy.
-
-
-
-
-
Quick report a year and a half later, all is perfectly good. They're so convenient and more solid than rubber on greasy metal. I still use them a ton and theres no stress cracks or looseness at all.
The cheap Chinese anodizing has faded to a brown, but thats to be expected for $5.
Buell on Buellers!
-
Senior Member
You rebel! Weren’t you warned of your insolence on the other board?!??!
-
I dunno, was I
-
Senior Member
Yes! Now I want to do this.
See what you’ve done!
-
Haha. As long as you aren't drill-phobic. Some think that just because a motorcycle mfg goes out of business, it makes every surviving motorcycle a candidate for The Barber Collection. Ugh.
I feel, it's a SUPER simple mod that makes servicing or storing your bike safer and easier. Hows that for a sales pitch! LOL
Send your internet likes to Cooter c/o The Asylum, Jerome, AZ 86331
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules