Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Xb9 d&d map?

  1. #1
    Junior Member
    Join Date
    Jun 2016
    Posts
    11

    Xb9 d&d map?

    Anyone willing to share maps for the XB9 with a D&D yet?

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,994
    That should be easy to find, but you'll need to give some more info.

    What are the rest of your mods? K&N and breather re-route are the most common.

    What is your firmware version? What program (file type) are you going to be using for the swap?

  3. #3
    Junior Member
    Join Date
    Apr 2017
    Location
    Montreal, Quebec
    Posts
    3
    Hi I'm new to this thread its my first post, excuse my english, I also would be interested in a map for 2008 XB 12ss BUE2D, D&D exhaust, K&N no breather re-route, ECM droid with buelltooth dongle, so if it is possible
    for someone I would appreciate this thanks Gaetan

  4. #4
    Junior Member
    Join Date
    Jun 2016
    Posts
    11
    Yep, just the D&D, K&N, and breather re-route.
    Firmware: BUEIB
    EcmDroid. So I will need an .xpr file

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,994
    Since you are both using ECMDroid for the swap, I suggest going to Buelltooth.com for the .xpr files. They offer free maps for anyone on their customer database.

  6. #6
    Junior Member
    Join Date
    Jun 2016
    Posts
    11
    Well.. I got their D&D map for a 9.. They said it was from a customer and they haven't tested it but MY bike runs kinda ****ty with it. Rough cruise, idles fine at first then wants to die after you ride a bit, has balls through the midrange at part throttle but is lacking at WOT and higher RPMs. I know the D&D is a midrange pipe but I switched from the RACE map which seemed to have more through the higher register. Also, I did a proper TPS reset and all that jazz

  7. #7
    Junior Member
    Join Date
    Apr 2017
    Location
    Montreal, Quebec
    Posts
    3
    Ok then.

  8. #8
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,994
    Whats your AFV? What are the limits set at?

  9. #9
    Junior Member
    Join Date
    Apr 2017
    Location
    Montreal, Quebec
    Posts
    3
    Thanks Cooter, I went and bought the Baro sensor on buelltooth.com to get a tune cause I already had bought the dongle from ecmcables.com at the time they were out of stock at buelltooth.com

  10. #10
    Junior Member
    Join Date
    Jun 2016
    Posts
    11
    My AFV adjusted from 100% down to about 83 or 89%. Don't remember exactly, I looked at it yesterday. I'm pretty sure the limits are set at 60% and 150%.
    On a side note, with the race map it would adjust from 100 to about 127%



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •