-
Junior Member
Xb9 d&d map?
Anyone willing to share maps for the XB9 with a D&D yet?
-
That should be easy to find, but you'll need to give some more info.
What are the rest of your mods? K&N and breather re-route are the most common.
What is your firmware version? What program (file type) are you going to be using for the swap?
-
Junior Member
Hi I'm new to this thread its my first post, excuse my english, I also would be interested in a map for 2008 XB 12ss BUE2D, D&D exhaust, K&N no breather re-route, ECM droid with buelltooth dongle, so if it is possible
for someone I would appreciate this thanks Gaetan
-
Junior Member
Yep, just the D&D, K&N, and breather re-route.
Firmware: BUEIB
EcmDroid. So I will need an .xpr file
-
Since you are both using ECMDroid for the swap, I suggest going to Buelltooth.com for the .xpr files. They offer free maps for anyone on their customer database.
-
Junior Member
Well.. I got their D&D map for a 9.. They said it was from a customer and they haven't tested it but MY bike runs kinda ****ty with it. Rough cruise, idles fine at first then wants to die after you ride a bit, has balls through the midrange at part throttle but is lacking at WOT and higher RPMs. I know the D&D is a midrange pipe but I switched from the RACE map which seemed to have more through the higher register. Also, I did a proper TPS reset and all that jazz
-
Junior Member
-
Whats your AFV? What are the limits set at?
-
Junior Member
Thanks Cooter, I went and bought the Baro sensor on buelltooth.com to get a tune cause I already had bought the dongle from ecmcables.com at the time they were out of stock at buelltooth.com
-
Junior Member
My AFV adjusted from 100% down to about 83 or 89%. Don't remember exactly, I looked at it yesterday. I'm pretty sure the limits are set at 60% and 150%.
On a side note, with the race map it would adjust from 100 to about 127%
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules