Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Custom Built Buell XB

Hybrid View

  1. #1
    Senior Member nicholas900's Avatar
    Join Date
    Sep 2013
    Location
    Buffalo NY
    Posts
    579

    Custom Built Buell XB

    Hey guys. Putting my Buell up for sale again. I was going to sell it a few years ago, but changed my mind. It is started life as a 2004 XB12R. This is a high quality build. No half assed stuff. I covered the build here several years ago. It currently has 4,399 miles. I have many of the original parts as well. This was a full rebuild, even though it didn't need it. Here is the parts list:

    Parts list:

    ENGINE

    Fuel pump
    O2 sensor
    Cyl head temp sensor
    Fuel injectors
    Ignition coil
    Plug wires
    Plugs
    IAT sensor
    EBR race ecm
    Drummer SS exhaust
    Drummer one off spring joint
    Jim's pulley nut
    Belt
    Full gasket set
    Oil and filter
    Primary chain shoe
    Primary adjuster nut
    Rizoma rear puller
    Pulley bolts
    Free spirits belt tensioner

    total $ 2090

    Suspension/Brakes

    Fork rebuild kit
    Penske rear shock
    Dunlop Q3's
    EBR front rotor
    Rear rotor
    Ft and rear pads
    Spiegler custom brake lines
    Front caliper rebuild
    Brembo radial front master cylinder
    Rear master cylinder rebuild kit
    Brembo rear caliper and hidden bracket
    Woodcraft rear sets
    Vortex clip on bars
    Rizoma grips
    Rizoma fluid cans
    CRG folding levers
    Billet brake line clamps

    Total $3014

    Chassis

    Front wheel bearings
    Rear wheel bearings
    Swing arm bearings
    Steering head bearings
    Carbon mud guard
    Carbon can cover
    Carbon oil cooler
    Breather catch can
    EBR fuel cap
    Front axle
    Front and rear bearing spacers
    Kick stand new style
    Front motor mount
    Rear motor mount
    Rizoma belt guard

    Total $870

    Lights and Gauges

    LED day maker headlight
    Motogadget m-blace ice front signals
    Motogadget m-blaze disc rear signals
    Custom dynamics led licence frame
    Custom dynamics 13 led tail/brakellight
    Dakota digital gauge cluster
    LSL headlight mounts
    Ballistic 12 cell lith/ion battery

    Total $2050

    Custom fabrication

    Hand formed gas welded air box cover
    Hand formed gas welded fender
    Hand formed days welded seat cowl
    Hand stitched seat
    Tube subframe
    Wiring harness
    Electronics plate
    Headlight bucket
    Gauge mount
    Breather reroute 3/8" steel line
    Licence plate mount
    Top triple machined
    Fluid can mounts
    Wiring harness clips
    Polished wheels
    Polished engine covers
    Polished rocker boxes and covers
    Redesigned grounding scheme
    Polished rear sets
    Polished belt tensioner
    Polished belt guard
    Custom trans vent
    Nickel plated oil lines

    Total raw materials, welding wire and gas $300

    Powder coat

    Frame
    Swingarm
    Subframe
    Licence plate mount
    Triple clamps
    Headlight
    Clutch perch
    Breather reroute tubes
    Pulley
    Kickstand and plate
    All brackets
    Oil cooler frame
    Cyl head tie plate
    Lots of other little stuff



    I'm asking $6,500 or reasonable cash offers. Here are some pics. This bike is flawless and unbelievably clean.











































    Thanks for looking. No dissapointments. Bike is NICE.

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    That is really inexpensive for an absolutely beautiful bike, besides being mechanically sound.

    GLWS, thats a badass ride

  3. #3
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    I really like that bike. Well done.

  4. #4
    Senior Member nicholas900's Avatar
    Join Date
    Sep 2013
    Location
    Buffalo NY
    Posts
    579
    Thanks guys.

  5. #5
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Yeah, that is amazing. You sir, are awesome. More awesome than Silverrider.

    I hope TPEHAK doesnt see the relays mounted in the airbox.

  6. #6
    Senior Member nicholas900's Avatar
    Join Date
    Sep 2013
    Location
    Buffalo NY
    Posts
    579
    Quote Originally Posted by 34nineteen View Post

    I hope TPEHAK doesnt see the relays mounted in the airbox.

    Well... it does have UV resistant heat shrink tubing on the custom made wire harness....

  7. #7
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    That is a beautifully done custom bike, very nice work !

  8. #8
    Junior Member
    Join Date
    May 2018
    Posts
    1
    I literally joined this page after i saw this bike for sale, want to build something similar but dont think i ever could honestly. beautiful bike man. This will definitely be inspiration. Id buy it from you but that takes all the fun out of it haha

  9. #9
    Senior Member SEXT9's Avatar
    Join Date
    Jul 2011
    Location
    Greensburg, IN
    Posts
    737
    This bike was an inspiration to me in mounting electronics under the air box. Super clean build. It’s definitely worth what you’re asking for it. If I could, I’d buy it myself.

  10. #10
    Banned
    Join Date
    May 2014
    Location
    Seattle
    Posts
    1,636
    Has this motorcycle been featured by any magazine like turboraven motorcycle?

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •