Help me out here guys. TPS seems to be creeping up to around 6.5 * after TPS resets. I turned the TPS cable back down. I also found where the exhaust valve actuator was still on. Turned it off and reflashed the ecm. I could rev the bike in neutral, no problem up to 6kish RPM. Put it in 1st gear, clutch in and rev and after 6k once it bogs and will not rev past 4500 it's like its hitting fuel cutout, it's just down on power. Seemed to clear up after I turned off the exhaust valve, but after a few minutes of riding it seems to be bogging a bit. I'll post some pics of what I'm seeing in ECMSpy. Only code I was seeing was Rear o2 sensor, but it cleared and didn't show again. I'm lost.. starting to get frustrated.20180620_160837.jpg20180620_160844.jpg