Results 1 to 7 of 7

Thread: Broke an exhaust retaining strap - safe to ride?

  1. #1
    Senior Member
    Join Date
    Dec 2017
    Posts
    100

    Broke an exhaust retaining strap - safe to ride?

    I was headed up a road that google maps suggested had some good corners on it, and there was an unmarked speed bump on it (same color as road, no sign, etc) and i ended up hitting it far too fast (didn't even see it, didn't even try to brake). Launched my butt out of the seat a bit, feet stayed on thankfully, and snapped the front retainer strap.

    The exhaust itself is amazingly intact, a small dent that was already there has a fresh superficial scrape on it (guess the PO did the same or hit a bad pothole; the bike did live in alaska before i owned it) but other than that no damage.

    I ordered a strap already. Would you ride on it in the meantime? Both rear straps are fine and there is the front clamp to the header which is intact/fine/tight.

    Also before anyone tells me, I know this was DUMB of me.

  2. #2
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    1,928
    I would wait for strap. Muffler is hanging by header now and could crack it do to vibration. That's my advice you do what you like it's your bike. Plus run the risk of breaking one of the back ones
    .
    Last edited by rchuff; 07-02-2018 at 09:50 AM.

  3. #3
    Senior Member mmcn49's Avatar
    Join Date
    Jan 2010
    Location
    Small Island in Puget Sound, WA
    Posts
    216
    NAPA sells similar straps, not quite the quality as OEM but they do work. You could get one, put it on and go riding until the new one arrives.

  4. #4
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,204
    Would you ride on it in the meantime?

    what Ricky and Ed said. absolutely do NOT ride it without necessary strap replacement. without doing so will break the exhaust header in short order.

  5. #5
    Senior Member
    Join Date
    Dec 2017
    Posts
    100
    I'll park it. thanks, guys.

  6. #6
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    5,649
    A long hose clamp will suffice in the meantime. A 'T-clamp' type of strap is all it is, a good parts store or any marine store will have one that is exactly like OEM

  7. #7
    Senior Member
    Join Date
    Apr 2010
    Posts
    123
    Got mine (hose clamp) at an HVAC/Plumbing supply house, think it was an 8" clamp and it worked fine until I went over a speed bump in a shopping center (mine's and Scg) but had a spare with me.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •