Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: 06 Buell XB12X ulysses stator or regulator issue

  1. #11
    Junior Member
    Join Date
    Jul 2018
    Posts
    7
    Yeah it is some Chinese stuff I just went out and looked because I wasn't sure what brand it is. I can't even remember what it is because I noticed my registration light was on with the key not in it. So I guess that is the source of my problems. Is that a common issue?

  2. #12
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Yes.

  3. #13
    Junior Member
    Join Date
    Jul 2018
    Posts
    7
    Quote Originally Posted by Cooter View Post
    Yes.
    Any fixes?

  4. #14
    Junior Member
    Join Date
    Jan 2018
    Location
    Groningen, the Netherlands
    Posts
    9
    Hi.
    My Uly has a battery voltage of 12.6 everyting turned off and the same everything turnnd on. At idle 13V of so.
    But starts every time.

  5. #15
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    What year, how many miles, how old is the battery, what kind of mods ?
    You can start by cleaning off all of your grounds really well, no matter what they visually look like.

  6. #16
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Quote Originally Posted by jkinzer View Post
    Any fixes?
    Yes, buy a good gel battery. 220CCA, not 200. Deka is a good brand.

    If the key is out and your "registration light was on with the key not in it" (I'll assume license plate/taillight):

    Put your key in, turn it out of the "P" (Park) position to either "Lock" or "Off". The taillight will go out and no longer drain your battery.

  7. #17
    Junior Member
    Join Date
    Feb 2017
    Location
    Wenatchee, WA
    Posts
    25
    Hey Lunaticfringe, Just wanted to give you a big shout out and say thank you. I have found several posts that have helped me get my Uly running. Cheers and thanks for all you do!

  8. #18
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    481
    Gauges will do their sweep and illuminate when you go pass 'off'. I got into the habit of looking at the gauges when I pull the key out just to make sure I don't do that....again.

  9. #19
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by Chuckski View Post
    Hey Lunaticfringe, Just wanted to give you a big shout out and say thank you. I have found several posts that have helped me get my Uly running. Cheers and thanks for all you do!

    always my pleasure sir and thank you for the kind words.

  10. #20
    Junior Member Foldout's Avatar
    Join Date
    Aug 2020
    Location
    Pacific Northwest
    Posts
    7
    Quote Originally Posted by user_deleted View Post
    2-remove your front pulley cover. you'll find 2 very large plastic connector plugs. one black the other light gray or white. the light colored one referred to as the #77 connector. unplug it...check for dirt/corrosion....check if burned or any wires frayed or burned. if so it must be repaired/replaced with updated connector. it is the charging system main connector plug.
    That light gray connector is the speed sensor connector. The #77 voltage regulator connector is the black 2-wire connector behind the rest, see this diagram from the manual:
    2006-Buell-sprocket-cover.PNG



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •