Results 1 to 5 of 5

Thread: Oberon Slave cylinder

  1. #1
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,790

    Oberon Slave cylinder

    I have 1125 race clutch springs to save my clutch from frying in my EBR1190 2015, and have shorty levers. In doing so I have a 47 lbs clutch pull. So I installed a Oberon 1125 slave cylinder, I heard it would make it smoother and less pull to my surprise it is now at 23 lbs pull. I dont use the clutch too often with the GP Quick shifter.

    Oberon1.jpg Oberon2.jpg





    http://www.oberon-performance.co.uk/...Cylinders.html

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Silver that is a stunning change. Thanks for posting, I have one on order from Lance

  3. #3
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,790
    I bought mine from Lance also he just started carrying it, Hope you get the same results as I did, It was a PITA to bleed. Air trapped in the line. A vacuum bleed or reverse bleeding is often the only way to cure it.

    https://st-paul-harley-davidson-buel...or-1125-models
    Last edited by Silverrider; 07-16-2018 at 03:00 AM.

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    I'll measure before and after like you did. I have stock levers, but would love shorties. The only reason I don't yet is because 47lbs of pull

    Hydraulic clutch slaves can be the worst! I don't know why but way worse than even rear brakes I have my tools and tricks though

  5. #5
    Senior Member MakingPAIN's Avatar
    Join Date
    Jul 2016
    Location
    scorched earth PHOENIX
    Posts
    230
    Cool thanks silver! I have been eyeing one of these set ups for a while. Now I am gonna get one.


    The cool blue color got me lol



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •