-
Senior Member
Oberon Slave cylinder
I have 1125 race clutch springs to save my clutch from frying in my EBR1190 2015, and have shorty levers. In doing so I have a 47 lbs clutch pull. So I installed a Oberon 1125 slave cylinder, I heard it would make it smoother and less pull to my surprise it is now at 23 lbs pull. I dont use the clutch too often with the GP Quick shifter.
Oberon1.jpg Oberon2.jpg
http://www.oberon-performance.co.uk/...Cylinders.html
-
Silver that is a stunning change. Thanks for posting, I have one on order from Lance
-
Senior Member
I bought mine from Lance also he just started carrying it, Hope you get the same results as I did,
It was a PITA to bleed. Air trapped in the line. A vacuum bleed or reverse bleeding is often the only way to cure it.
https://st-paul-harley-davidson-buel...or-1125-models
Last edited by Silverrider; 07-16-2018 at 03:00 AM.
-
-
Senior Member
Cool thanks silver! I have been eyeing one of these set ups for a while. Now I am gonna get one.
The cool blue color got me lol
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules