Results 1 to 4 of 4

Thread: 06 Buell Blast front master

  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    2

    06 Buell Blast front master

    Hello all, i just got an old buell off of a friend that isnt running, so im trying to bring it back to life.
    Need some help, the front master cyclinder is shot, the plunger is stuck in. Looking for a rebuild kit.
    I havent been able to locate parts for this. any suggestions.

  2. #2
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,475
    the front master cylinder rebuild kit is factory part # N0220.F with suffix L19C
    any H-D/former buell dealer should have them in stock. very common kit for many applications.
    if no luck there go to either new castle H-D or St. Paul H-D website, enter that part # and order up.
    NOTE: you'll have to lightly hone the bore of the m/cyl properly to assure smoothness and no nicks or corrosion or all the new kits in the world won't work correctly.

  3. #3
    Junior Member
    Join Date
    Jul 2018
    Posts
    2
    Thank you , for the part numbers

  4. #4
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,475
    Quote Originally Posted by soulscapex View Post
    Thank you , for the part numbers
    yes sir....my pleasure.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •