Originally Posted by
Chicknstripn
08 and 09 should be the same. However, R and S model wire harnesses are very different.
Your headlight can/bucket will have to be pretty big! Both fuse boxes, the flasher relay, the horn, the ecm and A LOT of large connectors are located under the front fairing set up of the XBR.
I changed my headlight set up on my XBR and used an XBS wire harness to accomplish the task. Changing out the harness required an engine rotation and A LOT of work. The XBS harness is designed to have everything that the XBR has in the front fairing reside in the tail section.
Plan out your mods before performing them.
I also made my own tail section so my build/desecration was a little different.