-
Member
2009 xb12r mirror question
Hey guys, bought the bike yesterday. How the heck do you adjust the mirrors?
Also is there a handlebar riser kit available for the bike?
-
Senior Member
Are your mirrors not staying where you adjust them? Pull back the rubber covering the hardware on the mirror and tighten the hardware if it’s loose.
Your bike is an XBR, it should have clip -ons that are built into the top triple tree. If it doesn’t then your set up isn’t stock.
Either way look into hero-bars, they make a lot of options for modifying clip on set up.
-
Member
Thanks, they are attached to the bottom of the fairing and are bolted in with 2 small bolts on each side
-
Senior Member
Bottom?
Should be at the top, on either side of the windscreen
-
Member
I just checked it out and you are correct
-
Senior Member
The mirrors on the firebolt are horrible. I got rid of mine and went with bar end mirrors. Got tired of looking at my arms in the mirrors. Can see way better with bar end mirrors. Plus they are cheap enough if they get broke. That's how I feel about them.
Last edited by rchuff; 09-09-2018 at 07:52 PM.
-
Member
Yeah may have to do that, they don't adjust much
-
Member
Found a pair of mirrors with built in turn signals on eBay Canada, got them , had them installed and they are waaayyy better, te kicker is 40 bucks shipped for the pair!
-
Senior Member
40 bucks shipped....
How much did it cost to have them installed?
-
Member
Nothing. Had to upbolt the old ones, cut the 2 wires, feed the new wires in the windshield, connect the wires and bolt the new ones in. Very easy
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules