Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Bar risers 09 xb12r

  1. #1

    Bar risers 09 xb12r

    Any bar riser kits for this bike that are easy to install, I am not really mechanically inclined. Inch higher would work for me

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Yes. And anything that fits a Harley Sportster will work. 4 bolts, very simple but also VERY important. Got a 'Car Guy' buddy? Take him a 6-pack and hang out in his garage for 20 mins while he does it for you

  3. #3
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    You have a Firebolt correct?

  4. #4
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    Pretty sure that's a different issue.

  5. #5
    Yes have an xb12 firebolt

  6. #6
    Senior Member wickedchop's Avatar
    Join Date
    Jun 2015
    Location
    New Jersey
    Posts
    1,451
    Your clip ons are incorporated into your top triple clamp. Woodcraft makes clip on risers but they will have to be the correct mm for your fork tubes and you will still have the spot where your original bar went into the top triple but it will just be empty. I still don't think your going to get the results your looking for becuse the woodcraft ones will be lower than your clamp. So it will probably be like pissing in the wind but you can call them and check their measurements for rise.

  7. #7
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    2,018
    Firebolt is more of a pain in the a-s to do then the Lightning. Can it be done, sure but it will cost way more money and personal don't think it is worth it. Just my 2 cents it's your bike.

  8. #8
    thanks, it really is not bad, might just get ne grips and call it a day!!!

  9. #9
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    Location
    High Point, NC
    Posts
    2,144
    Is the XBR the first bike you’ve owned with a sport bike type riding position?
    If so, I recommend tank/frame grips and when riding concentrate on using your legs(by squeezing the bike) and your core muscles to take the strain off your wrists.

  10. #10
    Senior Member Silverrider's Avatar
    Join Date
    Sep 2016
    Posts
    2,790
    Check it out Learn your bike https://superbikeschool.com/



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •