Starting to put the bike back together. New charging rotor, plugs, cam finger follower, EBR clutch actuator and a handful of other parts. I was soooo excited to have my bike back together that I added the engine oil first, before I realized that I forgot to install the oil cooler... YIKES!!! Little bit of mess but besides that, everything else went back together fine. I touched the starter button and she fired right up, charging at 14v at all RPM. Initially it popped and back fired, revving it in the garage. At first I thought I had messed up something. The battery has been disconnected for two months so I did a TPS reset (gotta love the 2008+ ECU) and that seams to have fixed it up. It's -10 Degree C. outside so a proper test run will have to wait for now.