Hey everyone looking for some quick help. I have an 03 xb9s and I saw my fuel pump connectors were corroded so i pulled them apart and cleaned them. Ended up letting them sit for a month. Now im ready to put the pins back in the connector but for some reason a little voice in the back of my head is telling me the yellow/red wire and the brown/yellow wire went together rather than matching wires in the opposite connector. I dont think thats right and dont know why they would be crossed but that damn little voice. Anyway, could someone with a pre 08 run outside and check your connectors for me and let me know what goes to what. There should be a black, grey, yellow/red, brown/yellow. Thanks