Any help on this would be greatly appreciated, Ive searched the forums and haven't found the exact answer so thought id ask away..
08 XB12R Firebolt.. CEL comes on and stays on, I jumped pins 1 and 2 of the diagnostic plug and got the error code 21, previous owner says the CEL came on after the bike was towed from a sporting event by police Dept .. I was wondering if there would be anything that was affected by the tow in ? Also checked voltage at the plug for the muffler actuator and it has 12v
manual says turn on key, run switch on and twist throttle fully open and actuator should move ... mine doesn't.. any other ideas how to test or anything I may be m missing ?
thx again for helping a newbie....