Originally Posted by
nicholas900
I rebuilt mine. Not bad to do. However I wonder if that's actually your issue. Do I understand this right?
-You had no issue with your rear brake. It worked fine.
-You decided to bleed out the old fluid as preventative maintenance . Now you have a problem.
-You are moving the brake lever to bleed. It travels through it's stroke but no fluid comes out of the bleeder on the caliper.
If you are pushing the pedal and it moves the plunger in the MC, it's not seized. It could have worn seals but...
I think the problem might be just how you are bleeding the brakes. Care to describe how you are going about the bleeding procedure? Might be as simple as not properly bleeding the system and having air in the MC.