Results 1 to 9 of 9

Thread: FS: Buell XB12 Custom Header

  1. #1
    Senior Member
    Join Date
    Jun 2011
    Posts
    268

    FS: Buell XB12 Custom Header

    I have a custom header for sale. This is an equal length header and both tubes are 1.75" to the collector, it has two O2 bungs for tuning. It is made out of stainless steel and I was running it on my XB12 before I sold it. I know it fits 04-07 but not sure if it fits 08-10 due to the case's being different. You will need the metal clips from your current headers to keep this exhaust on.

    Make Offer

    20181105_174701.jpg
    Last edited by neomac3444; 04-01-2019 at 05:21 PM.

  2. #2
    Senior Member
    Join Date
    Jun 2011
    Posts
    268
    Anyone want this?

  3. #3
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    Location
    High Point, NC
    Posts
    2,144
    Any idea who made them?
    And you have any feedback on how those headers perform, compared to stock?
    Thanks

  4. #4
    Senior Member
    Join Date
    Jun 2011
    Posts
    268
    I made it myself. I also tuned it with Wideband O2's and not on a dyno. So there is no comparison between this one and stock. The biggest benefit was that i got two O2 sensors in the exhaust to get front and back cylinders.

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Thats funny. I just got a new TIG and am planning on making one myself soon

    Was there anything notable about building it? I was just planning on mocking it up on the bike and tacking it together, before I put it on the bench to purge and TIG it fully.

  6. #6
    Senior Member
    Join Date
    Jun 2011
    Posts
    268
    I had the motor out of the frame......it helped greatly with deciding on where to route it. But otherwise thats exactly what I did.

  7. #7
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Awesome thanks!

  8. #8
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    Location
    High Point, NC
    Posts
    2,144
    Quote Originally Posted by neomac3444 View Post
    I had the motor out of the frame......it helped greatly with deciding on where to route it. But otherwise thats exactly what I did.
    Does a RSS, the one from the comfort kit, still fit the bike with these headers installed?

  9. #9
    Senior Member rb70383's Avatar
    Join Date
    Jul 2008
    Posts
    481
    Quote Originally Posted by Cooter View Post
    Thats funny. I just got a new TIG and am planning on making one myself soon

    Was there anything notable about building it? I was just planning on mocking it up on the bike and tacking it together, before I put it on the bench to purge and TIG it fully.

    I'll be looking forward to pics....

    Dam I need to learn how to tig....


    Looking at the headers seems to mimic the ones used with cats. IIRC RSS wont fit.

    RSS kit


    Last edited by rb70383; 04-09-2019 at 09:11 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •