Results 1 to 4 of 4

Thread: XB Cams in Blast

  1. #1

    XB Cams in Blast

    Hi all.

    Am considering doing the XB head, XB9 piston, cam swap on my Blast. Of the 4 cams in an XB, which do I need? Are the cams in a 9 the same as those in a 12?

    Thank you all in advance.

  2. #2
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,396
    Are the cams in a 9 the same as those in a 12?


    YES

    Am considering doing the XB head, XB9 piston, cam swap on my Blast. Of the 4 cams in an XB, which do I need?

    reach out for board member jet-lee. he's done this and will know. also see below link. everything you'll need to know about your little project....all courtesy of Lee.

    https://buellridersonline.com/forum/...ton%2Fjug+swap

  3. #3
    Senior Member
    Join Date
    May 2014
    Posts
    592
    Lunatic beat me to the punch. Lee is "the man" with regard to the Blast, and quite a few Blast owners (including myself) congregate virtually at the bulletin board linked in John's post.

  4. #4
    Thank you both very much. Will do! Now to begin the hunt for a front XB cylinder head!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •