-
Senior Member
Ground Locations
I know grounds have been brought up ad nauseum, but none of the posts I've found give a simple list of locations of each ground location that needs to be cleaned. I did the two seat rails, but I believe there is one behind the flyscreen as well. Also, there is the large braid between the two points behind the airbox base cover, but these bolts required quite a bit of torque, and I was unsure if removing them would cause more than just the connection points to become dislodged. I looked at the schematic in the service manual, and quickly discovered I have no clue how to read it. Any help with a simple description of where to find all the grounds that are all so important to keep cleaned wold be appreciated. Pictures would be even better if anyone has them handy.
-
Senior Member
Year and model and, mods will help.
-
Senior Member
07 XB12SCG open airbox, K&N, Jardine exhaust, breather re-route
-
http://buellmods.com/content/downloa...ing_manual.pdf
Pictures with arrows labeling everything.... Starting at Section 7, page24.
-
Member
Last edited by John Vreede; 06-25-2019 at 11:31 AM.
-
Senior Member
Thanks guys, I'll have to read through old posts a little more thoroughly. This forum is really a great source of info, and makes owning a bike with this kind of character much less daunting.
Last edited by RidetheLightning; 06-25-2019 at 06:53 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules