Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: COMPLETE XB fuel pump service kit-any board member interest???

  1. #31
    Senior Member mmcn49's Avatar
    Join Date
    Jan 2010
    Location
    Small Island in Puget Sound, WA
    Posts
    297
    Quote Originally Posted by lunaticfringe View Post
    first batch of NEW OEM fuel pumps arriving here by friday from Talladega distribution center.
    now listed NLA...de-listed from active parts system.
    P0130.5AA-suffix B2Q fits all XB models but specifically for 2008-2010. the only difference is in the wiring harness connector.
    original dealer list was $369.99 plus tax where applicable.
    board member price is $299 and i'll pay the shipping. bought all 6 left....2 pre-sold...let me know.
    Attachment 11411
    PM Sent

  2. #32
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP

    Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
    pump motor
    pump suction sock filter
    outlet high pressure filter PART # P0101.02A8
    outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
    high pressure regulator supply fuel line
    two(2) fuel line clamps in either Oetiker or worm drive style-your choice
    fuel pressure regulator-factory pre-set to 52psi
    regulator-to-housing sealing O-ring
    regulator pintel O-ring
    housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
    fuel level sensor assembly-PART # P0789.KA
    submersible wire-tie for wiring harness

    NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.


    As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.

    Total kit price will be $189 and $6 USA freight.
    Canadian freight price via USPS first class approx. $25
    World-wide freight price via USPS first class air is $29/USPS priority air is $37

    To order your kit either PM or email me.
    John

    scootertrash196@yahoo.com
    Last edited by user_deleted; 04-07-2019 at 11:50 AM.

  3. #33
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    Got my new oem pump assembly today! Thanks John.

  4. #34
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    I hope it's like my snow blower. If you have one you won't need it.

  5. #35
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by Outlaw View Post
    Got my new oem pump assembly today! Thanks John.
    sure thing josh. and now you have a new one on the shelf that you might never need. LOL
    speaking of which, the new complete XB pump rebuild kits are ready if needed. working on early style 2003 kits but not ready yet. these will completely rebuild the 2004-2010 pumps. PM or email if you need one.
    pump.jpg
    p1.jpg
    p2.jpg
    p3.jpg

  6. #36
    Senior Member
    Join Date
    Jan 2010
    Location
    Melbourne, Australia
    Posts
    284
    Received my rebuild kit on Tuesday ( less than a week to here in Australia).
    I can now start work on the restoration of a really toasted 12X pump assembly that I have had in the 'too hard' tray for quite a while.

    Thank you for going to the trouble of putting this kit together for the collective - as previously stated, you are a good man John.

  7. #37
    Junior Member
    Join Date
    Jun 2019
    Posts
    2
    PM sent

  8. #38
    Senior Member rchuff's Avatar
    Join Date
    Apr 2012
    Location
    Willow Grove, Pa
    Posts
    2,018
    Will say John's fuel pump kit is awesome! It has everything you will need for a complete rebuild. Thanks for putting these kits together John. Glad I have one in stock for just in case. I would say it is money well spent.



Page 4 of 4 FirstFirst ... 234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •