Results 1 to 3 of 3

Thread: Electrical issue 06 XB12R

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    1

    Electrical issue 06 XB12R

    Has anyone any ideas on this: When the ignition switch turns back to the park light position (counter clockwise behind "lock") no lights come on. When I turn forward to the RUN position I get my headlights both high and low beams working. The bike will turn over and start. BUT my tail light will not light up nor will the brake light come on and on top of it the signal lights won't come on when I hit the switch (both sides). I've run direct power with jumpers to the lights and the lights seem to be working. I've also run a multi-meter to the harness and I'm not getting power coming to the back of the bike. My entire cluster is also out, not a dam thing in the dash lights up not even the neutral light nor odometer.
    Last edited by buellbolz; 04-10-2019 at 04:27 AM.

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    You can find the complete wiring diagram and service manual at Buellmods.com or Buelltooth.com

    Sounds like a simple issue with a common cause.

    and "Check your grounds" Buellizm 101

    Edit: I assume you have checked the fuses?
    Last edited by Cooter; 04-10-2019 at 03:52 PM.

  3. #3
    Senior Member
    Join Date
    Jan 2010
    Location
    Melbourne, Australia
    Posts
    284
    This might be worth a quick look - you didn't mention blinkers but this sounds similar to an issue I had with an '06 Uly many moons ago.
    https://www.buellxb.com/forum/showth...gnition+switch



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •