Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: NEW XB FUEL PUMP REBUILD KITS ready to ship!

  1. #1
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526

    NEW XB FUEL PUMP REBUILD KITS ready to ship!

    FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP

    Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. NO CHINESE GARBAGE! In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines and the 3 motor-to-housing O-rings.....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
    pump motor
    pump suction sock filter
    outlet high pressure filter PART # P0101.02A8
    outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
    high pressure regulator supply fuel line
    two(2) fuel line clamps in either Oetiker or worm drive style-your choice
    fuel pressure regulator-factory pre-set to 52psi
    regulator-to-housing sealing O-ring
    regulator pintel O-ring
    housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
    fuel level sensor assembly-PART # P0789.KA
    submersible wire-tie for wiring harness

    NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.

    As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.

    Total kit price will be $189 and $6 USA freight.
    Canadian freight price via USPS first class approx. $25
    World-wide freight price via USPS first class air is $29/USPS priority air is $37

    To order your kit either PM or email me. i had also mentioned this before but if you're not comfortable with rebuilding your own pump simply ship to me and i'll rebuild it for a reasonable fee plus the kit and return freight charge.

    I ALSO HAVE NEW-IN-BOX NOS PUMP ASSEMBLIES FOR $289 WHICH IS APPROX. $100 BELOW ORIGINAL DEALER SUGGESTED LIST PRICE.

    John

    scootertrash196@yahoo.com
    Last edited by user_deleted; 08-29-2019 at 09:36 PM.

  2. #2
    Senior Member Dobe1's Avatar
    Join Date
    Oct 2013
    Location
    Alexandria VA
    Posts
    198

  3. #3
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by lunaticfringe View Post
    FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP

    Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. NO CHINESE GARBAGE! In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines and the 3 motor-to-housing O-rings.....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
    pump motor
    pump suction sock filter
    outlet high pressure filter PART # P0101.02A8
    outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
    high pressure regulator supply fuel line
    two(2) fuel line clamps in either Oetiker or worm drive style-your choice
    fuel pressure regulator-factory pre-set to 52psi
    regulator-to-housing sealing O-ring
    regulator pintel O-ring
    housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
    fuel level sensor assembly-PART # P0789.KA
    submersible wire-tie for wiring harness

    NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.

    As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.

    Total kit price will be $189 and $6 USA freight.
    Canadian freight price via USPS first class approx. $25
    World-wide freight price via USPS first class air is $29/USPS priority air is $37

    To order your kit either PM or email me. i had also mentioned this before but if you're not comfortable with rebuilding your own pump simply ship to me and i'll rebuild it for a reasonable fee plus the kit and return freight charge.
    John

    scootertrash196@yahoo.com
    pump.jpg p2.jpg

  4. #4
    Senior Member Chicknstripn's Avatar
    Join Date
    Aug 2014
    Location
    High Point, NC
    Posts
    2,144
    I have my kit on the way!
    Thanks John!
    Looking forward for spending some quality time with my bike! Between this kit, the wheel bearings I got from you, and some new spark plugs I'll have a practically new ride!
    Thanks again for putting this kit together!

  5. #5
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by Chicknstripn View Post
    I have my kit on the way!
    Thanks John!
    Looking forward for spending some quality time with my bike! Between this kit, the wheel bearings I got from you, and some new spark plugs I'll have a practically new ride!
    Thanks again for putting this kit together!
    always my pleasure carlos. i need to temper my enthusiasm and response to your kind words as Opto says i'm not only creepy but a hermit.....so don't want to alarm you.

  6. #6
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by lunaticfringe View Post
    always my pleasure carlos. i need to temper my enthusiasm and response to your kind words as Opto says i'm not only A BAD ASS but a HELL OF A GREAT GUY.....so don't want to alarm you.
    Fixed it for you!

  7. #7
    Senior Member
    Join Date
    Jan 2019
    Location
    Eastern Maryland
    Posts
    107
    I'm pretty sure that the lunatic isn't a hooligan also.

  8. #8
    Senior Member wickedchop's Avatar
    Join Date
    Jun 2015
    Location
    New Jersey
    Posts
    1,451
    ^^^^^^^^ Then apparently you don't know John. Worst one out of all of us!!!!!!

  9. #9
    Member
    Join Date
    Oct 2019
    Location
    North Georgia
    Posts
    65
    Will this FP rebuild kit fit an 05 XB9 City X ?

  10. #10
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by atank View Post
    Will this FP rebuild kit fit an 05 XB9 City X ?
    yes sir it will. email me and i'll get you fixed up.
    scootertrash196@yahoo.com



Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •