-
Junior Member
Electrical issue 06 XB12R
Has anyone any ideas on this: When the ignition switch turns back to the park light position (counter clockwise behind "lock") no lights come on. When I turn forward to the RUN position I get my headlights both high and low beams working. The bike will turn over and start. BUT my tail light will not light up nor will the brake light come on and on top of it the signal lights won't come on when I hit the switch (both sides). I've run direct power with jumpers to the lights and the lights seem to be working. I've also run a multi-meter to the harness and I'm not getting power coming to the back of the bike. My entire cluster is also out, not a dam thing in the dash lights up not even the neutral light nor odometer.
Last edited by buellbolz; 04-10-2019 at 04:27 AM.
-
You can find the complete wiring diagram and service manual at Buellmods.com or Buelltooth.com
Sounds like a simple issue with a common cause.
and "Check your grounds" Buellizm 101
Edit: I assume you have checked the fuses?
Last edited by Cooter; 04-10-2019 at 03:52 PM.
-
Senior Member
This might be worth a quick look - you didn't mention blinkers but this sounds similar to an issue I had with an '06 Uly many moons ago.
https://www.buellxb.com/forum/showth...gnition+switch
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules