Okay so real beginner question. I took the airbox base off, and when putting back on realized I didn't note whether the rubber seal at the bottom was fitted within the hole of the base or whether it was just pressed up on the bottom. I assumed it must be an actual seal given the lip, and tried for about half an hour to get the lip pulled through all the way around the hole, only for it to pop right back out once I tried to bolt the filter back down to it (since it has an open airbox mod). Here's a picture of what it looks like with the seal pulled up through the base. If this is the way it's supposed to be, can anyone tell me how to thread a nut under the bottom without pulling it back off?IMG_4008.jpg