Thanks
Cool
Let is know how they work out and if you would be so kind, maybe post some pictures when they arrive?
Jack-O-Lantern
2006 Buell XBRS LightningBolt
http://www.buellxb.com/forum/album.php?albumid=129
For future reference, I ordered some Torx screws through McMaster a couple of years ago to replace some of the ones for the chin fairing. Not identical to OEM, but close and they worked well.
https://www.mcmaster.com/90910A537
The heads on the non-shouldered bolts were quite a bit smaller than the original torx heads, I'm just going to run washers. For the shouldered bolts I knew the head wouldn't be as big so I would be using a washer, just guessed on the shoulder length minus the washer thickness and they're a bit too long. I'm not messing with sending them back, I'll just run an extra washer plus the plastic washer.
https://www.mcmaster.com/shoulder-screws
So the appropriate bolt would be the 5/16 shoulder bolt in 1/4-20 thread with a 1/4 (or less) not 5/16 length shoulder, 90298A574 would be my guess.
20190515_210541[1].jpg
20190515_210631[1].jpg
Good info, thanks for posting it.
Measured with calipers shoulder dia. - .309, length of shoulder - .167, head dia. - .555
Good stuff
Thanks for posting pics and measurements
Jack-O-Lantern
2006 Buell XBRS LightningBolt
http://www.buellxb.com/forum/album.php?albumid=129
I have been able to find quite a bounty of parts at St. Paul Harley Davidson. www.sphdonline.com