Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Downloading .xpr file to Kindle Fire HD10

  1. #11
    Senior Member jl551c's Avatar
    Join Date
    Aug 2009
    Location
    Nipomo, Ca and Lake Luzerne, NY
    Posts
    714
    You bought the Buelltooth from Cole Houser? From the couple of times I talked to him on the phone he was quite willing to help. After scratching your head for a bit more and doing some more research on the forums, shoot him an email if you can't figure it out. It took me a while to figure it out, but I got there.

    I've only done this once, so I"m no expert, but I can say that after matching up the correct ECM program with my muffler my bike ran great. Smooth acceleration with no decal pop. Runs great. Good luck.

  2. #12
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,695
    If it runs great now, why mess with it

    Use ECMDroid to see what the ECM is doing and it will tell you if the bike is running well before you put in some free map you found and have to start a thread named "HELLP!!..."

    Besides, ECMDroid is much more accurate than your butt-dyno will ever be.

  3. #13
    Quote Originally Posted by Cooter View Post
    If it runs great now, why mess with it

    Use ECMDroid to see what the ECM is doing and it will tell you if the bike is running well before you put in some free map you found and have to start a thread named "HELLP!!..."

    Besides, ECMDroid is much more accurate than your butt-dyno will ever be.
    Good call, thanks for the advice.

  4. #14
    Senior Member
    Join Date
    Mar 2015
    Location
    Phoenix, AZ
    Posts
    1,196
    Quote Originally Posted by jl551c View Post
    You bought the Buelltooth from Cole Houser? From the couple of times I talked to him on the phone he was quite willing to help. After scratching your head for a bit more and doing some more research on the forums, shoot him an email if you can't figure it out. It took me a while to figure it out, but I got there.

    I've only done this once, so I"m no expert, but I can say that after matching up the correct ECM program with my muffler my bike ran great. Smooth acceleration with no decal pop. Runs great. Good luck.
    I don't think Cole is selling these anymore. He doesnt hang out here much from what I can tell, but last I knew he was active on the BuellXB.com Facebook page. He's a good dude.

  5. #15
    Senior Member lowkey's Avatar
    Join Date
    Sep 2012
    Location
    Bullhead AZ
    Posts
    745
    Sounds like your kindle device or email app won't allow the .xpr file to be downloaded correct? On the kindle device using a file explorer app you can navigate to the EEPROM folder on internal storage? Do you see a the .xpr EEPROM file that can be saved through ECMDroid in this folder? Plug the kindle into a computer and use Android file transfer or equivalent on PC or MAC computer, the kindle will show up just like an external hard drive, from here have the .xpr file downloaded on the computer and place it into that same folder mentioned above. Go and connect to the bike through ECMDroid and make sure in the settings you have the box checked for burning to the ECM enabled then back on EEPROM tab navigate to the EEPROM you placed in that folder... also make sure the file name starts with your ECM's ID (example: BUEIB). Let us know if this worked for you and good luck!

    !!!Also if the EEPROM file you are trying to burn does not match the ECMID of your ECM, do not attempt or change the ID, the file sizes are different and will not work!!!


    Last edited by lowkey; 05-30-2019 at 05:53 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •