this happens alot mike. and it goes like this:
the 3-bearing XB rear wheel will fit all XB's except the 7/2002 thru 12/2002 XB9.
the 3-bearing axle will interchange with both 2 & 3 bearing wheel styles
you are missing items 1 & 2 in the provided schematic and that is why the wheel is shifted over towards the rotor side.
items # 1 & 2 both install on the rotor side.
the schematic i've listed provides the part numbers. buy new or used. still a few of each in dealer inventory.
IMPORTANT: when installing these you MUST install a small amount of grease around outside lip of the spacer. and you MUST initially snug up axle....the loosen 2 turns...then torque to spec. that procedure properly seats everything.
5820_20100910124152_L.jpg
Originally Posted by lunaticfringe
Posting Permissions
Reply With Quote