Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: 3 Bearing Rear

Hybrid View

  1. #1
    Senior Member outthere's Avatar
    Join Date
    Jun 2018
    Posts
    657

    3 Bearing Rear

    I have 2 set of wheels, the second being magnesium in color and the rear is a 3 bearing unit. I tried mounting this up today and the rotor and pulley are off to the left 3/16" of an inch. The bearings all seem to be the same and the assembled order looks correct. Does this wheel just fit the Uly?

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    The axle is different for the 3-bearing wheel.

    The black axle will do both wheels though.

  3. #3
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Isn’t there a different spacer for the 3 beating wheel?

  4. #4
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    F02766DA-0C86-4A2B-A067-7361306305F1.jpg

    Heres the assembled order of a 2010 Uly ^^^

    #13 is about 3/16" Are you missing that?
    Last edited by Cooter; 06-08-2019 at 06:33 AM.

  5. #5
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    10,877
    Yes, absolutely. The 2 bearing spacer would never fit in a 3 bearing wheel though!

    An assembled 3-bearing wheel will fit (with these 2 parts) on any XB.

    Axle: G0321.5AK
    Shim: G0620.5AK
    Last edited by Cooter; 06-08-2019 at 06:30 AM.

  6. #6
    Inactive
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,526
    Quote Originally Posted by outthere View Post
    I have 2 set of wheels, the second being magnesium in color and the rear is a 3 bearing unit. I tried mounting this up today and the rotor and pulley are off to the left 3/16" of an inch. The bearings all seem to be the same and the assembled order looks correct. Does this wheel just fit the Uly?
    this happens alot mike. and it goes like this:
    the 3-bearing XB rear wheel will fit all XB's except the 7/2002 thru 12/2002 XB9.
    the 3-bearing axle will interchange with both 2 & 3 bearing wheel styles
    you are missing items 1 & 2 in the provided schematic and that is why the wheel is shifted over towards the rotor side.
    items # 1 & 2 both install on the rotor side.
    the schematic i've listed provides the part numbers. buy new or used. still a few of each in dealer inventory.
    IMPORTANT: when installing these you MUST install a small amount of grease around outside lip of the spacer. and you MUST initially snug up axle....the loosen 2 turns...then torque to spec. that procedure properly seats everything.

    5820_20100910124152_L.jpg
    Last edited by user_deleted; 06-08-2019 at 10:06 AM.

  7. #7
    Senior Member 34nineteen's Avatar
    Join Date
    Mar 2015
    Location
    Kolache Factory
    Posts
    4,424
    Quote Originally Posted by lunaticfringe View Post
    this happens alot mike. and it goes like this:
    the 3-bearing XB rear wheel will fit all XB's except the 7/2002 thru 12/2002 XB9.
    the 3-bearing axle will interchange with both 2 & 3 bearing wheel styles
    you are missing items 1 & 2 in the provided schematic and that is why the wheel is shifted over towards the rotor side.
    items # 1 & 2 both install on the rotor side.
    the schematic i've listed provides the part numbers. buy new or used. still a few of each in dealer inventory.
    IMPORTANT: when installing these you MUST install a small amount of grease around outside lip of the spacer. and you MUST initially snug up axle....the loosen 2 turns...then torque to spec. that procedure properly seats everything.

    5820_20100910124152_L.jpg
    The master has spoken.

  8. #8
    Senior Member
    Join Date
    Jan 2016
    Posts
    828
    I just found out myself the the M2 Cyclone also uses a 3 bearing rear wheel.

  9. #9
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    Do you know if it s the same as the XB’s rear 3 bearing set up ?

  10. #10
    Senior Member outthere's Avatar
    Join Date
    Jun 2018
    Posts
    657
    Looking at the wheel it looks like all the pieces are there. The 3/16 spacer is installed behind the bearing instead of on the outboard side.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •