Pics
Not sure if the bearings are the same I never looked into it. I'm sure John will know.
Lunatic and I agree you are missing the spacer, (#13 in my pic, #2 in his), and thats all you need to install the wheel correctly in your bike, with the right axle. Part numbers in my other post.
You 'might' not have the additional Uly dust seals (he only mentioned #1, but it's #8 as well in his pic), but you can omit them. They won't affect the assembly and the bearings are sealed already with the "RS" suffix.
Yes, all three bearings are the same:
E0005.5AK
That black thing (spacer) in the 3rd pic isn't what your talking about, possibly installed in the wrong order? thanks
Yes, you are correct
It's the big, thick (3/16"), black washer that goes on the axle after the axle goes through the wheel, on the single bearing side, then thread the axle in the swing arm.
External of the wheel, not between the bearings. Your pic seems to show the spacer was put behind the bearing.
Neither of the exploded views show any spacer between the dual bearings either.
Last edited by Cooter; 06-09-2019 at 02:34 AM.
Njloco the 3 bearings on the Cyclone are not the same. 2 different part #s.
I'll get that fixed, thanks. In the meantime In bought another NOS 2 bearing wheel. $149 complete.
0-4.jpeg
0.jpeg
My 08 Uly has the 3 bearing mod and it doesn't look like the pictures shown before.
This top pic (drive sprocket side) shows where the spacer does NOT go. It goes on the brake rotor side shown by the bottom pic.
It is easy to mistake where the spacer goes because it looks like it fits perfectly on the drive belt side.
Thanks to the lunatic for guidance.
Last edited by The Bob; 06-09-2019 at 06:25 PM.