Originally Posted by
Cooter
I am positive the steps you need to do for whatever tune you got are on their website because FIRST you need to know if that tune is meant to be run in Open Loop only. Once you find that out, do the steps below. PLEASE, don't do this unless you KNOW what tune it is. Ask them.
From memory, IIRC, YMMV, their website has better info about their tunes, etc...
In ECMDroid, Go to ECM parameters.
First in general config, uncheck "closed loop operation"
then in O2 setup, set both the AFV minimum and Maximum values to 100.
Then burn that tune in, do a TPS re-set according to the manual (also found on the Buelltooth.com or Buellmods.com website).
and see if that works.