Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: Cooling fan won't come on

  1. #11
    Senior Member
    Join Date
    Mar 2015
    Location
    Phoenix, AZ
    Posts
    1,196
    Reading the screenshot...it shows under Key On that the on fan turns on at 180c and turns off when it gets hotter @ 220c?

    Do you live in Australia?

  2. #12
    Junior Member
    Join Date
    Nov 2018
    Location
    The Netherlands
    Posts
    16
    Yes that's weird. Does Buell specify the standard values? Or what is recommended?

    I live in the Netherlands by the way.

  3. #13
    Senior Member lunaticfringe's Avatar
    Join Date
    Feb 2011
    Location
    AmishLand, PA.
    Posts
    7,490
    below values/settings factory. someone has F'ed with your settings.

    2008 XB12, BUE2D calibration.

    Fan Key-On ON temperature: 220*C
    Fan Key-On OFF temperature: 180*C
    Fan Key-Off ON temperature: 190*C
    Fan Key-Off OFF temperature: 170*C
    Fan Key-Off Run Duty Cycle: 40%


    On the 2004-2007s with BUEGB231 firmware the temps are.

    Key-On ON temp - 170C or 338F
    Key-On OFF temp - 130C or 266F
    Key-Off ON temp - 120C or 248F
    Key-Off OFF temp - 100C or 212F


    and then you have this................

    https://www.buelltooth.com/fan-settings.html
    Last edited by lunaticfringe; 08-01-2019 at 01:16 PM.

  4. #14
    Junior Member
    Join Date
    Nov 2018
    Location
    The Netherlands
    Posts
    16
    Ok thank you very much!

  5. #15
    Junior Member
    Join Date
    Nov 2018
    Location
    The Netherlands
    Posts
    16
    Wait.. Why are the temperature settings for the '2008 XB12, BUE2D calibration.' so much higher than the '2004-2007s with BUEGB231 firmware'?

  6. #16
    Senior Member
    Join Date
    Mar 2015
    Location
    Phoenix, AZ
    Posts
    1,196
    Because lunatic said so.

    He is a Buell Shaolin Priest of the highest order. He has a dexterity of 19, and an armor class you could only dream of. His most powerful spells are motorcycle clairvoyance and forum charm. He also darns socks for the homeless on Tuesdays.

  7. #17
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    1,948
    If you can get his telephone number and your lucky enough to call and he's available, just hold the phone next to the bike and it will fix itself !

  8. #18
    Junior Member
    Join Date
    Nov 2018
    Location
    The Netherlands
    Posts
    16
    Ah, humor. I have it too.

    - Dwight Schrute

  9. #19
    Junior Member
    Join Date
    May 2019
    Posts
    5
    Quote Originally Posted by lunaticfringe View Post
    below values/settings factory. someone has F'ed with your settings.

    2008 XB12, BUE2D calibration.

    Fan Key-On ON temperature: 220*C
    Fan Key-On OFF temperature: 180*C
    Fan Key-Off ON temperature: 190*C
    Fan Key-Off OFF temperature: 170*C
    Fan Key-Off Run Duty Cycle: 40%
    https://www.buelltooth.com/fan-settings.html
    I think that depends on witch country it were bought in, I live in Sweden and my XB12 - 08 is original and has this settings.


    on on - 225*c
    on off - 195*c
    off on - 130*c
    off off - 110*c

    off run duty cycle 40%

    100% runtime key off 3s

  10. #20
    Senior Member
    Join Date
    Mar 2015
    Location
    Phoenix, AZ
    Posts
    1,196
    Spotted at some vintage Kawasaki motorcycle repair shop in PA

    D629852B-848F-4E78-A483-1EAC02906037.jpg



Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •