Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Convert *.bin to *.xpr

  1. #1
    Banned
    Join Date
    Jun 2019
    Posts
    83

    Convert *.bin to *.xpr

    Hi guys,

    I've been away for a while, but I was still working on trying to improve my Buell ECM knowledge. (not gave up yet)
    I'm also busy preparing a file to add to my previous post (https://www.buellxb.com/forum/showth...re-time-on-ECM) where to show by MLV screen shots and comments many things that seems to be nonsense in my logs view. (for anybody interested)
    In the mean time I prepared some slightly modified fuel/spark maps to try.
    Here I've got big questions I'm worried about:
    The maps has been done with Tunerpro RT V.5 and it saves in *.bin.
    I saw that my original map downloaded with ECMdroid is saved in *.xpr format, and in that way it has been read and modified by Tunerpro.
    Now, how to upload on ECM the modified maps with ECMdroid???
    Shall I use the saved *.bin file or so I am going to destroy my ECM?
    Have I to use some software to convert the file?
    Is it enough to rename the *.bin file changing extension to *.xpr?
    I searched a lot on the forum and found something about, but not enough to make me sure about what I shall do.
    Please, knowledge guys, would you like to point me in the right direction?

    Tanks a lot

    Osvaldo

  2. #2
    Banned
    Join Date
    Jun 2019
    Posts
    83
    Did I say something wrong?
    Should I change my fuel pump?
    Last edited by osvaldo; 08-14-2019 at 01:23 PM.

  3. #3
    Senior Member
    Join Date
    Apr 2018
    Posts
    153
    Osvaldo I'll check how i do mine when I get home later on today.
    In the mean time lowkey might chime in and give you an answer.

  4. #4
    Senior Member
    Join Date
    Apr 2018
    Posts
    153
    Quote Originally Posted by osvaldo View Post
    Did I say something wrong?
    No you have not.

  5. #5
    Banned
    Join Date
    Jun 2019
    Posts
    83
    Quote Originally Posted by cossack84 View Post
    Osvaldo I'll check how i do mine when I get home later on today.
    In the mean time lowkey might chime in and give you an answer.
    Ok cossack84,

    thanks in advance for your info.

  6. #6
    Banned
    Join Date
    Jun 2019
    Posts
    83
    Quote Originally Posted by osvaldo View Post
    Did I say something wrong?
    Should I change my fuel pump?
    Hi lunaticfringe,

    I am seeing two of your post answering to my question disappearing from here.
    That's make my answer to you a nonsense.
    I'm very sorry for that.

  7. #7
    Senior Member
    Join Date
    Apr 2018
    Posts
    153
    Osvaldo I never had luck converting tunerpro maps to ECMdroid. The only way I have been uploading and downloading is using tunerpro and ecmspy. I know this is a crappy answer, but maybe some one will chime in with something other then off topic videos/memes.

  8. #8
    Banned
    Join Date
    Jun 2019
    Posts
    83
    Ok cossack84,

    it seems to me that as Tunerpro can load and read straight away *.xpr from ECMdroid (through *.xdf), it should be possible revert the process.
    Let's hope somebody knowing more likes to share.

    thank you very much any way.

  9. #9
    Banned
    Join Date
    Jun 2019
    Posts
    83
    Hi cossack84,

    I got an answer to my question from Buelltooth guys even if they are not directly involved with tunerpro!
    They said: If you modify an .xpr file in tunerpro and then click the “save bin” button it will stay .xpr. Don’t click “save bin as”
    It works.
    On PC, I saved a copy of my stock EEPROM (xpr) in a different folder, reamed it adding 'to be mod', open and modified with tunerpro, saved with "save bin" (it stay xpr), renamed it changing 'to be mod' in 'mod1', moved back to original folder, sended by mail to the smartphone, downloaded there in the right folder, and I got it.

    I hope this can help some of us willing to have a better bike without throwing away bags of money changing half of the bike, because if just in case...
    This is of course not to say than anybody should work on without knowing what is doing to his engine, but for the rest if is not broken I don't like to change it...

    Osvaldo

  10. #10
    These files are fully identical. It's as simple as renaming them.



Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •