Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: MAP/Baro sensor on XB Mod help

  1. #11
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,824
    Boom. Ya see that npetra? Just what you need

  2. #12
    Junior Member
    Join Date
    Jul 2018
    Posts
    3
    Great Gunter
    Now I need just the AMP pin to connect properly to ecm.
    Somebody have a couple of pin to sell ?
    Anyway, Many thanks to all.
    I will keep you posted....
    Last edited by npetra; 09-11-2019 at 07:50 PM.

  3. #13
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,824
    https://www.ebay.com/itm/LOT-10pc-Ty...kAAOSw1~Nctnv4




    But honestly getting the whole deutch kit comes in very handy.

  4. #14
    Junior Member
    Join Date
    Oct 2019
    Posts
    4
    Yeah, I have the Baro option on my 2006 Uly with the single one wire cheap O2 sensor, haven't had a whole lot of elevation changes to test it but I like the idea of it over the slow O2 or altering the entire fuel map.

  5. #15
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    6,824
    The stock ECM will only read a narrow band (one wire) O2 sensor. Even if you put in a Wide Band O2, it will have to use the NB emulator to have the ECM read it to get to Closed Loop. The ECM only knows lean/rich, not how much lean or rich.

    The O2 sensor gets read several times a second, so if you need faster adjustments for elevation changes, you're probably falling off a cliff, LOL. Seriously hope that not the case Haha

    Not ironically, the Baro option is a complete global map change modifier. A simple more pressure/enrichen calculation.



Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •