😍😁
Hi guys,
I'm still trying to improve my knowledge on MLV.
Anyone knows the meaning of Flags 0 to 5 values?
Regards
Last edited by osvaldo; 09-10-2019 at 05:51 AM.
😍😁
I'm upset John answered before I could. I was going to say the same.
osvaldo, much of what you ask is already conveniently documented:
http://ecmspy.com/cgi-bin/runtime.cgi
Also, if you haven't already, you should look over the Buell Tuning Guide and other info from Gunter Baumann/Nick Pashley.
Last edited by ReadyXB; 09-10-2019 at 05:38 PM.
But it's much easier for him to just facebook questions on here one at a time, starting a whole new thread, over and over.
Why would he look up the directions when he can have us look up the answer and get spoon fed one at a time? It's much easier that way. For him anyway lol.
Hi Ready,
thanks for the answer.
Before to post any question or observation here you can be sure I have done all of my best to find myself the answers on the net as well as here with search tool.
I could not find what I was looking for, as you will not will find what is in this topic in the link you post that off course I know as well as the other stuff you mention and much much more.
So, after 8 year just reading this forum, and wanting now to fully understand ECM stuff I decided to get in and post somewhat.
During this years I have seen a few guys with a lot of this knowledge, a few more willing to do what I'm doing, and among all the other, as anywhere, a few of unpleasant people.
Definitely, I think I am in the right place and as far as some 'ECM' guys are still here I will still post.
This not to say I am not interested in the rest of my Bike, but in this case I will have probably much more answers than questions
My regards
So... same answerI'm upset John answered before I could. I was going to say the same.
😍😁
s Cooter,
you are wrong.
That stuff is over your head (you said it, and I fully believe you) so you have not been asked to do nothing at all for me.
The same run for people like you.
Also, I am not expecting anybody else start to study for me, just if they already know may be they can like to share.
Just get back in my post where I am asking if is not possible that anybody that not interested in what I am talking about just stay away doing something else, instead to make useless comments.
That's still on top.
A different way for you to learn about the various config settings and live data is to look at the Tunerpro RT v5 .xdf and .adx files for Buell:
http://tunerpro.net/downloadBinDefs.htm#Buell
Just open with a text editor. Within a short time you can become familiar with the file format and then see how the ECM settings/runtime data are broken down.
Sorry, I don't quite follow the wording here. The same flags parameters that you can add to an MLV log view are shown on the ecmspy link I shared. Could you rephrase?
I have a currently unmanageable amount of logs, spreadsheets, notes, emails, etc. growing over time for ddfi. My gifting is not in making nice presentations of said data, which ecmspy.com has done very nicely.
Not the first time that's happened. Even today But you missed the point of my post.
Again
Here, let me help you:
https://www.buellxb.com/forum/showth...uestion-thread