I’m going though my new-to-me 2006 Ulysses, and I discovered that the 6 threaded holes that hold the upper fairing in place bunged up pretty badly. One threads well, two don’t tighten at all, and three I can’t run a #10-32 bolt in more than a centimeter. The bolts I pulled out were all different, so they screwed the threads up pretty badly. I assume I’m going to have to tap larger diameter threads in there. Has anyone done this? I was thinking M6. It’s a little smaller diameter than 1/4-20, and just barely small enough that I won’t have to drill larger holes in the fairing piece.