-
Senior Member
20200525_180233.jpgNew bench lathe
20200526_143949.jpgNew TIG welder
20200418_101943.jpgA view to a Buell....or 2...always a battle, to build or to go for a ride....
-
Senior Member
So....how many years now......so much messing around. BUT I have a guy coming next month, who is a trike certifier, so there will be flurry of action for the next few weeks.
Below is the method I am hoping to use to connect the swing arms to the diff tubes. There are gussets as well to joint the tube to the box.
20210209_184614[1].jpg
-
Senior Member
20210228_155111.jpg
LH swingarm fully longitudinally welded, ready to be welded to the diff mounting blocks
20210228_152307.jpg
LH and RH diff mounting blocks. These slide over the diff axle tube before I weld the bearing cups on, and the swing arms butt onto the flat faces.
20210228_195531.jpg
These are the wheels my GF has chosen, and a sneak peek of how things will look.
-
Senior Member
FB_IMG_1628841894583.jpg
progress. It is rideable, but the rear brake master cylinder needed to be changed to a larger one, and that meant i had to redesign and fabricate a new foot rest assembly, still in progress. steps forward.....sideways shift....
-
Wow! Still plugging away at this. Looks like it's getting very close
-
Senior Member
yes, its a labour of love. The light at the end of the tunnel is shining bring on my face tho
-
Senior Member
I new this guy who was a welder, he built his own from the ground up and installed a turbo diesel vw motor, he's the center of attraction where ever he goes.
Cool project, good luck with it.
-
Senior Member
Interesting read and nice work on the trike. The regulations for customizing vehicles concerns me both for and against. The east coast of the. US mostly has annual safety inspections the west emissions tests. The middle mostly lax on either. But for suspension brakes and frame modifications it seems like you have a wonderful resource for engineering help and final safety inspection.
I wish we had a similar program here.
-
Senior Member
Yes, the system does work.....and I have learned ****loads along the way. Good things take time, and sadly I wayyyyyy underestimated how much time goes into building a trike.....the physical building part is really quite small compared to the time spent researching, planning, preplanning.....the forward thinking and the little details.
-
Senior Member
So this Trike has taken several years. Ain't life wonderful.
It is very near ready for its first official teat ride by the certifier. I have a minor issue where I used the wrong tube nuts on the brake likes and the threads bottomed out before sealing. I got brake fluid everywhere......and I have to redo all the hard lines again with new tube nuts as cutting the existing lines to fit new tube nuts makes the lines just a bit to short and messes with the aesthetics. pedantic, yes. time consuming, yes. I am putting together a file for the Certifier with all the materials and any conceivable photo of everything I've done, which he will submit to the powers that be, and then if he is comfortable with the way it rides etc I get to then pull it all apart again, and then paint it all up pretty and nice. The Blue guard I sprayed out shows the colour. Once I paint it all, put it back together and the certifier is happy I haven't changed anything and tried to hide it with bog (bondo) or paint......I can then let the good woman ride. And I get my Buell to myself.....
20210723_221627[1].jpg20210724_135211[1].jpg20220404_175002[1].jpg20220309_195544.jpg20210726_203032.jpg
I do have a short video somewhere which I will find and post eventually, of me test riding it a few months ago........
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules