Ignition coil resistance check.

[cossack84]

Chasing a hard start on 2004 XB. Measured primary and secondary side of the ignition coil. Measured 1.3 - 1.4 Ohm on primary and ~11,700 Ohms on the secondary. According to the manual both are way out of spec, primary should be 0.5 to 0.7 and secondary 5.5k and 7.5k. Kind of odd both sides are jacked on mine. Would appreciate some one would check their coil on 04 model.

Also sprak plug wires are reading ~180 ohms or so.

Attached is a picture of how I checked the windings.