Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: ENGINE light with limp home mode?

  1. #31
    Senior Member
    Join Date
    Mar 2019
    Posts
    135
    All good suggestions above. Since you are still having problems I would suggest electrical tape. Just cut a piece small enough to cover the light. Fixed!

  2. #32
    Junior Member Keith Turk's Avatar
    Join Date
    Jan 2020
    Posts
    20
    Quote Originally Posted by dantroop View Post
    All good suggestions above. Since you are still having problems I would suggest electrical tape. Just cut a piece small enough to cover the light. Fixed!
    My adult son was paralyzed a few years ago and I bought a handicap van so he could come home and visit... Yep.. someone did exactly this to it... the Airbag light wouldn't go off so they taped it. Took seatbelt cartridges and a sensor to fix the light...

  3. #33
    Junior Member Keith Turk's Avatar
    Join Date
    Jan 2020
    Posts
    20
    Rear head temp sender Fixed it. Pulled the Fan, tested fine, replaced the Temp sending unit next. That's seemed to fix the issue. CEL is out and the bike runs normally.

    I did buy a 2006 Ulyssess as a spare and plan on parting it out. Friend of mine knew I was shopping for one and we bought this one pretty cheap. it's not overly compatible with my 09 but several parts are useable ... ( I'll keep the stuff I can use. )... If you guys need anything let me know.

  4. #34
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    I sent you a PM I need some parts but if the bike is salvageable maybe a bike.

  5. #35
    Senior Member
    Join Date
    May 2016
    Location
    Central Soviet state of new jersey.
    Posts
    2,674
    Rear plastic fender with the license plate light, and all the signals, foot pegs, external shifter linkage ?

    Let me know.

    Thanks

  6. #36
    Junior Member Keith Turk's Avatar
    Join Date
    Jan 2020
    Posts
    20
    You guys can check out the bike on my instagram page KeithTurk200

  7. #37
    Junior Member Keith Turk's Avatar
    Join Date
    Jan 2020
    Posts
    20
    I've sold the part's bike... Thanks for all your help guys

  8. #38
    Senior Member
    Join Date
    May 2018
    Location
    Vancouver WA
    Posts
    376
    To me
    Thanks Keith I'll work out the details ASAP.



Page 4 of 4 FirstFirst ... 234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •