Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Buelltooth not flashing...any ideas?

  1. #1
    Member
    Join Date
    Feb 2020
    Location
    Milwaukee and Illinois
    Posts
    41

    Buelltooth not flashing...any ideas?

    Hey guys,

    So I just purchased a Buelltooth and it isn't flashing. I've installed w/ power-off, made sure it's switched to run (right-hand control) then turn key to on/run position. Nothing. Bike runs, no issues, but this is the first time I've attempted to service the ECM.

    Though & ideas appreciated,


    Dan

  2. #2
    Senior Member Cooter's Avatar
    Join Date
    Dec 2012
    Location
    Crawling up your skirt
    Posts
    7,337
    Have you tried to connect to it anyway?

    You're doing it right. I'd check for blown fuses first and give them a call.

  3. #3
    Senior Member BuellyBagger's Avatar
    Join Date
    Apr 2010
    Location
    Nebraska City, NE
    Posts
    3,539
    Test for voltage at the data port maybe? Probably not the issue but an easy check

  4. #4
    Member
    Join Date
    Feb 2020
    Location
    Milwaukee and Illinois
    Posts
    41
    Thanks for the ideas, guys!

  5. #5
    Member
    Join Date
    Feb 2020
    Location
    Milwaukee and Illinois
    Posts
    41
    Forgot to respond to your direct question. Yes, I tried connecting and searching for a bluetooth signal in the off-chance the LED was just out, nothing. I did get a response from Buelltooth and they said all units are tested a few times prior to shipping so I'm going to assume, for now, it's something on my end. He suggested checking for ground issue. I'll try again tonight. Thanks again.

  6. #6
    Senior Member
    Join Date
    Mar 2015
    Posts
    1,590
    Have you checked the voltages at the connector?

    Me thinks pins #1 and 3 are 5v, #4 is 12v and #2 is ground.

    Checking and cleaning your grounds is always a good bit of maintenance anyhow.

  7. #7
    Senior Member BuellyBagger's Avatar
    Join Date
    Apr 2010
    Location
    Nebraska City, NE
    Posts
    3,539
    Quote Originally Posted by 34nineteen View Post
    Have you checked the voltages at the connector?

    Me thinks pins #1 and 3 are 5v, #4 is 12v and #2 is ground.

    Checking and cleaning your grounds is always a good bit of maintenance anyhow.
    Eh hem.... already said that . Ok so I didnt list the voltages...

  8. #8
    Senior Member
    Join Date
    Mar 2015
    Posts
    1,590
    Yeah, you did. I noticed after I posted, but figured i’d leave it for the voltages.

    34:19<BB

  9. #9
    Member
    Join Date
    Feb 2020
    Location
    Milwaukee and Illinois
    Posts
    41
    Just to report back, my issue was user error.

    I didn't realize I had to be in neutral to engage the ECM!

    So, I popped the bike into neutral and as soon as I heard the fuel-pump fire up the Buelltooth started flashing & works like a charm.

    Thanks again, everyone, for the ideas and my apologies for being a newby!

    Dan

  10. #10
    Senior Member
    Join Date
    Mar 2015
    Posts
    1,590
    Interesting. I would have never considered that, as I always leave mine in neutral when parked.

    Cool you got it figured out! Thanks for reporting back!



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •