-
Member
2010 Buell XB12Scg Idle Speed
Hi all,
I have a 2010 Buell XB12Scg that is all stock other than a K&N air filter and a Hawk exhaust and I am wanting to adjust the idle speed. The factory set idle speed of 900-950 RPM is too high in my opinion and I would like to drop it down to something like 750-800 if I can. There is nothing wrong with the bike and the only reason I want to do this is so that it sounds better when idling at a light, right now, IMO, it sounds like a very loud lawnmower.
I know that this bike has no external idle adjustment screw like the 07 and earlier bikes and that the idle speed is controlled by the ECM but I have heard that is possible to adjust the idle speed using ECMSpy. My question is what setting should I change in ECMSpy to achieve my goal. I'm not super savvy with the tool and just looking through all the settings available is a bit intimidating. It would be helpful to know precisely which setting(s) to change so that I don't mess up the rest of my tune.
Will doing this be bad for the bike in anyway ie. too low oil pressure at idle?
Any help would be appreciated.
Gord
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules